3D scanning & spare part service in Vienna
Part broken? We make your spare part.
Not available anywhere, the manufacturer is gone, and replacing everything would be expensive? Bring us the broken part. We 3D-scan it in 1080 Vienna and print it again for you.
from €120 for scan and first partParts up to about 30 cm
- No 3D file needed
- Quote before printing
- Pick-up in 1080 Vienna
How your spare part is made
From broken to fitting again
One part, three steps: we scan the original, rebuild it as a 3D model on the computer and print it again.
Original
You bring us your broken part, up to about 30 cm.
3D model
We scan it and build an exact model on the computer. If something is missing, we add it here.
Reprint
We print your spare part again, with the shape and dimensions of the original.
Before & after
Original left, reprint right
We take shape and dimensions from the original, even if it is worn or chipped.
Lever and plate of a mechanism
Two interlocking parts, including the cut-out for the axle.
End cap for a square tube
With the fins that hold it in the tube.
Typical spare parts
Which spare parts can we reproduce?
Often it is just one small part that is missing. If the manufacturer no longer exists, you would otherwise have to replace the whole window, shower door or cupboard. With a reproduced part, everything stays as it is.
Windows
Window handles, cover caps, sliders, parts of roller shutters and blinds
Bathroom
Shower door rollers and sliders, brackets, caps, clips
Furniture & kitchen
Hinge covers, furniture feet, handles, drawer guides
Home & garden
Knobs, dials, clips, holders and covers
Well suited
- Holders, covers and caps
- Clips, knobs, dials and handles
- Rollers, sliders and guides
Less suited
- Parts that safety depends on
- Spots that get hot permanently
- Heavily loaded parts that were made of metal
We scan parts up to about 30 cm. Not sure? Send us a photo and we will tell you honestly whether it works.
In 4 steps
That's how easy it is
Send photos
Send us a few photos using the form, or bring the part straight to the shop.
Check & quote
We tell you honestly whether it works and send you a quote. We only print once you say okay.
Scan & print
We scan the part, add anything missing on the computer and print it in a suitable material.
Pick up or delivery
You pick up your spare part at the shop or we send it to you.
Clear & fair
What does a spare part cost?
- 3D scan
- from €100
- one-off, depending on effort
- First part
- €20
- more on quotation
- Together
- from €120
- scan and first part
- Rebuilding broken areas:
- depending on effort
- If something has broken off or is missing, we rebuild it on the computer.
Not every part is suitable for 3D printing. You get a quote first, and we only print once you say okay. All prices incl. VAT. Your 3D file stays with us: a reprint later only costs the printing.
More than spare parts
3D scanning can do more
No broken part, but an idea? We scan the original from all sides and print it again, the way you need it.
Copy figures & decor
A small figure, an ornament or a decorative object that no longer exists, as a replica.
Several copies
We turn one original into several, for example as gifts or for a small series.
Adapt parts
Longer, shorter, a hole moved or a matching holder added: we change the model on the computer.
Get an early assessment
Show us your part
With a few photos we can tell you in advance whether it works and what it costs.
Tips for your photos
- Photograph it from the front, the side and below
- Put a ruler or tape measure next to it
- One photo of where the part sits (window, shower door, furniture)
- Include any label or type plate, if there is one
Reach us directly
3D files or photos
optionalDrag files here or
STL · STEP · 3MF · OBJ · JPG · PNG · HEIC — up to 25 MB per file, max. 5
We usually reply within one business day. Your data stays with us — no third-party sharing.
Here for you in person
3D scanning right in 1080 Vienna
Just bring your broken part in. We look at it together and tell you right away whether it works.
- Bring the part and talk it through
- Scanning and printing with us in Vienna
- Pick up your spare part at the shop
Josefstädter Straße 58
1080 Wien
Di–Fr 10:00 – 18:00Sa 10:00 – 14:00
Suited to the job
The right material
- PETGTough and waterproof
- Tough, does not break easily and copes with water. Our first choice for bathroom parts.
- ASAWeather- and sun-resistant
- Hardly fades in the sun and copes with heat. For parts on windows and outdoors.
- TPUSoft and flexible
- Rubbery and bendable. For buffers, stoppers, feet and parts that should give a little.
Short answers to important questions
Frequently asked questions about spare parts
What does a 3D-printed spare part cost?
Scan and first part together cost from €120. The 3D scan is a one-off from €100, depending on shape and effort. Printing costs €20 for the first part, every further one on quotation. If something is broken and needs rebuilding, there is a surcharge depending on effort. You get a quote first.Do I need a 3D file or a drawing?
No. You bring the part, we scan it and create the print file ourselves. A few photos are enough for a first assessment.How big can the part be?
We scan parts up to about 30 cm. Typical are handles, caps, rollers, clips and brackets.What if the part is broken or something is missing?
Bring everything that is left of the part, including broken-off pieces. We scan them and rebuild what is missing on the computer. This costs a surcharge depending on effort, which we tell you beforehand.Do I have to bring the part in?
We need the part for the scan. You can bring it to the shop or send it to us. Photos are enough beforehand so we can tell you whether it works.
Does a printed part last as long as the original?
That depends on the part and the load on it. We choose the material to suit the job and tell you honestly beforehand what to expect.Which parts are not suitable?
Parts that safety depends on, spots that get hot permanently and heavily loaded parts that were made of metal. If in doubt, send us a photo and we will tell you honestly whether it works.Can you also copy a figure or a decorative object?
Yes, if it is no bigger than about 30 cm. We scan the original and print a replica, several or adapted if you like.Do I get the 3D file?
The file stays stored with us. If you need the part again later, you only pay for printing, not a new scan.
Repair instead of replace
A part broken? Show it to us.
Send us a few photos. We tell you whether it works and what it costs.
Your own project instead of a spare part? Calculate a price